Минералогия / Металлургия

Прикладная база данных

Please contact us for an individual consultation.

Листовка по применению (2)

Metallurgical Industry
Coal

"the sample" (8)

No. 36
Искусство измельчения - Современные технологии

No. 34
Новости о продукции‘09

No. 33
SAMPLE PREPARATION IN PRACTICE & NEW RETSCH INSTRUMENTS

No. 31
Grand Prix Season 2008 & New RETSCH Instruments

No. 29
New Product Generation 2007

No. 28
Think big but grind fine!

No. 26
CAMSIZER - Optical Particle Size and Shape Analysis

No. 24
Anniversary issue of the RETSCH customer magazine 10 years "the sample"

Отчёты о применении (16)

Representative results require adequate sample preparation
The following situation is typical for many production plants: After a routine quality check, the production process is stopped or an already produced batch is suspended, because the analysis results were not within the relevant critical values. But does the tested product really deviate from the specifications? The quality control managers are convinced of this because modern analysis instruments provide results with very low tolerances. The sample in question was tested several times and the result was confirmed. The question is why the product does not match the specifications although the production parameters have not been changed in any way.
The possibility that the tested product is indeed deficient cannot be excluded. However, it is often not the product itself which causes irregular analysis results but a lack of understanding of the steps which come before the analysis.

Powerful Cutting Mill
The SM 300 excels especially in the tough jobs where other cutting mills fail. It has a freely selectable speed range from 700 to 3,000 rpm with high torque. The mill is convenient to operate and easy to clean. Reliable and extremely efficient sample preparation in the laboratory is now guaranteed with the SM 300.

As pure as possivle
Even if size reduction is carried out under ideal conditions, the mechanical stress which the sample material exerts on the surface of the grinding tool causes abrasion. However, it is possible to minimize this effect by selecting suitable mills and grinding tools. If the sample material needs to be ground to sizes below 100 microns, strong mechanical forces are required which increase abrasion.

Separation of large sample volumes with the AS 450 control
Particle analysis of large quantities of bulk goods is usually done by vibratory sieving. In most vibratory sieve shakers in the market the sieve stack is mounted
on springs which oscillate vertically. However, to evenly distribute the material
over the entire sieve surface, the so called 3D vibratory sieving as it is used in the AS 450 control is the most suitable method. This is characterized by a circular
motion superimposing the vertical throwing motion so that the sample material
is moved over the whole sieve.

Air Jet Sieving of Bulk Materials
Particle size analysis and particle size distribution are important criteria for the quality control of bulk materials. In a running production process, the results of a quality check must be available quickly to allow for immediate adjustment of the production parameters. Depending on the expected particle size and sample volume, different sieving methods and sieving machines are suitable for analysis. The method used for particle size analysis is primarily determined by the fineness of the material to be sieved. For dry sieving of samples with particle sizes below 40 microns, air jet sieving is the method of choice.

Cutting Mill SM 300 - Refinement of a well-proven grinding principle
Cutting mills are used in many different areas of sample preparation for subsequent analyses. Typical applications include the size reduction of secondary fuels, the processing of biomass for renewable energy research, the control of products in the context of RoHS and WEEE regulations or the recovery of precious metals – the variety of sample materials is huge.

Sample Preparation for XRF Analysis
From sample to pellet

Representative sample preparation for XRF analysis
Preparing homogeneous samples by milling

Fast and Reproducible Sample Preparation with a Vibratory Disc Mill
The Vibratory Disc Mill RS 200 from Retsch is used for the quick, loss-free grinding of hard, brittle and fibrous materials to analytical fineness.

Cement - representative sample preparation is important
To produce high-quality cement, the mineralogical and chemical composition of raw materials as well as intermediate and finished products has to be determined. At each stage of the production, samples have to be taken, processed and analysed to ensure quality control without gaps. Retsch offers a range of instruments that are used for sample preparation during the complete production process, from the quarrying of the raw materials to the final product. The typical sample preparation process involves preliminary size reduction, sample division and fine size reduction before the sample can be submitted to further analyses....

Size reduction within the context of sample preparation
In general “size reduction” is taken to mean the disintegration of solid substances by mechanical forces without altering their state.

Consistent Milling on a Nano Scale
Planetary ball mills are helping scientists and engineers advance nanotechnology by providing a consistent way to produce nanoscale powders.

The preparation of samples of solid substances for spectroscopic analysis
X-ray fluorescence spectrometry is one of the most versatile multi-element methods of chemical analysis. The technique is based on excitation of fluorescent radiation from a sample by bombarding it with high energy X-ray quanta and subsequent study of the characteristic X-ray radiation emitted by its elements.

Höchstleistung im Doppelpack
Mit der PM 100 und der PM 200 präsentiert Retsch eine neue Generation von Planeten-Kugelmühlen mit einer bzw. zwei Mahlstellen, die in diesem Produktsegment neue Leistungsstandards setzen.

Herstellung von Nanopartikel mit der Planeten-Kugelmühle
Die Herstellung von Nanopartikeln, deren Größe im Bereich von 1 Mikron und kleiner liegt, ist in vielen technischen Bereichen immer mehr auf dem Vormarsch, denn sie ermöglichen die gezielte Veränderung von Materialeigenschaften.

Molienda ultrarrápida y ultrafina
El nuevo molino ultracentrífugo ZM 200 de RETSCH es un molino de rotor no sólo extremadamente rápido y cuidadoso con el material molido, sino también de uso universal gracias a su amplia gama de accesorios.

Пресс - релизы (1)

Versatile Ultra Centrifugal Mill with New Cyclone
RETSCH’s powerful and versatile ZM 200 offers the ultimate in performance and operating comfort. It is used for the rapid size reduction of soft to medium-hard and fibrous materials down to 40 microns. Because of the efficient size reduction technique and the comprehensive range of accessories the ZM 200 ensures the gentle preparation of analytical samples in a very short time.
For applications which require an optimum air throughput (e. g. heat sensitive materials) or if larger sample volumes need to be processed, the use of a cyclone is recommended. RETSCH offers a re-designed cyclone with improved functionalities for collector volumes from 250 ml to 5 liters which adds to the ZM 200’s great flexibility.
Thanks to the wide range of accessories with different rotors, ring sieves and collectors, the ZM 200 can be easily adapted to suit a wide range of applications such as, for example, heavy-metal-free grinding, size reduction of abrasive materials or processing small volumes up to 20 ml.