Машиностроение / Электроника
Application Database
Отчёты о применении (12)
Representative results require adequate sample preparation
The following situation is typical for many production plants: After a routine quality check, the production process is stopped or an already produced batch is suspended, because the analysis results were not within the relevant critical values. But does the tested product really deviate from the specifications? The quality control managers are convinced of this because modern analysis instruments provide results with very low tolerances. The sample in question was tested several times and the result was confirmed. The question is why the product does not match the specifications although the production parameters have not been changed in any way.
The possibility that the tested product is indeed deficient cannot be excluded. However, it is often not the product itself which causes irregular analysis results but a lack of understanding of the steps which come before the analysis.
Efficient Grinding at –196 °C
RETSCH’s New CryoMill for Safe and Reproducible Grinding with Liquid Nitrogen
Tracking down hazardous substances (RoHS/WEEE)
Preparing electronic waste for obtaining representative analytical samples.
A solution for converting an electrical appliance into a meaningful analytical sample is described using a remote-controlled toy car as an example.
Size reduction within the context of sample preparation
In general “size reduction” is taken to mean the disintegration of solid substances by mechanical forces without altering their state.
Sample Preparation of Electronic Scrap in the Context of RoHS and WEEE
Since August 2004 new EU directives for the disposal of used electrical and electronic appliances as well as the restricted use of certain hazardous substances in these devices have become effective.
Sample preparation of electronic scrap with SM 2000 and ZM 200
RETSCH mills in the context of RoHS and WEEE
Die neue Power Generation
Planeten-Kugelmühlen haben seit jeher einen festen Platz in der täglichen Laborpraxis zur Feinzerkleinerung unterschiedlichster Materialien. Neben dem Mischen und Zerkleinern hat sich in den letzten Jahren auch im mechanischen Legieren z.B. thermoelektrischer oder hochkoerzitiver Materialien ein weiteres Anwendungsgebiet ergeben.
Kraftvolle Schneidmühle
Die Schneidmühle SM 300 überzeugt vor allem bei schwierigen Zerkleinerungsaufgaben. Sie verfügt über eine variable Drehzahl von 700 bis 3000 min-1 und zeichnet sich durch hohe Durchzugskraft aus. Die Mühle lässt sich komfortabel bedienen sowie schnell reinigen. Die SM 300 garantiert eine zuverlässige und sehr effektive Probenvorbereitung im Labor.
Molienda ultrarrápida y ultrafina
El nuevo molino ultracentrífugo ZM 200 de RETSCH es un molino de rotor no sólo extremadamente rápido y cuidadoso con el material molido, sino también de uso universal gracias a su amplia gama de accesorios.
Thermoelektrische Wandler - Eine Technologie aus der Raumfahrt
Mechanisches Legieren von thermoeletrischen Materialien für die Raumfahrt, entwickelt vom Institut für Werkstoff-Forschung in Köln, Arbeitsgruppe "Thermoelektrische Materialien".
